The 3MF reader that stays on your device
Know the plate.
Price the print.
Get grams, print time, and cost per plate using your slicer's own numbers. Unsliced project? Get a volume-based weight and cost estimate, not a made-up print time.
01 Your file, on the table.
Browser onlyDrop your 3MF here
Project or sliced file. We'll read the difference.
Nothing uploads. Your browser reads the file on this device.
No file handy?
A cube + a keychain. An unsliced project.This file is over 300 MB. Unpacking and previewing it can use much more memory. Close other tabs if needed.
File read. Nothing sent.
Your build plate
3D PREVIEWLoading preview…
On the plate
A guess, not a slice.
Solid weight = volume (cm³) × density (g/cm³). The fill estimate multiplies that weight by the percentage below. It doesn't recover walls, supports, or purge.
Slice in Bambu Studio or OrcaSlicer to get the slicer's time and material figures.
Read, don't re-slice.
Sliced file? Get the slicer's time and filament estimates, plate by plate. Project file? See the geometry, with the limits spelled out.
Your file never leaves.
No account. No upload queue. Your browser opens the file, does the math, and creates any STL you download.
Check the material, too.
Nozzle compatibility, plate temperatures, and drying guidance, with sources beside the numbers.
Open the filament guideSlicer numbers come from your file.
Fill estimates come from you.