What the reader does

  1. It opens the 3MF ZIP package locally and reads model and slicer metadata.
  2. It applies each model's transform to its triangle vertices, so displayed dimensions describe the positioned geometry.
  3. It keeps slicer-provided plate predictions and filament usage separate from geometry-derived values.

For a project file, the reader follows the package's 3D/3dmodel.model relationship to component models under 3D/Objects/*.model. It applies each component's full build transform, then reports object names and plate assignments from model settings when those records exist.

For a sliced file, it reads the Metadata/slice_info.config index for plate names, object names, prediction seconds, and filament weights in grams. Project settings can also provide density, cost, colour, printer, layer-height, sparse-infill, and wall-loop hints. Missing hints remain missing.

The file is not sent to a Platewise server for parsing. A browser can still expose selected files to extensions or other software on that device.

Volume from triangles

For each triangle with vertices a, b, and c, the signed tetrahedron contribution is:

contribution = dot(a, cross(b, c)) / 6

Platewise sums those contributions across the mesh and takes the absolute value:

volume = abs(sum(contribution))

This works best for a closed, consistently oriented mesh. Open surfaces, self-intersections, duplicate shells, or bad winding can make the result unreliable. All geometry is normalized to millimetres internally; the user-facing enclosed volume is shown in cubic centimetres (mm³ ÷ 1000).

Weight needs density

When a valid published density is available, the material estimate follows:

weight (g) = volume (cm³) × density (g/cm³)

That equation uses volume and density only. For a closed mesh, the solid-weight figure is a 100% solid upper bound. It is not a slicer result: walls, infill, supports, purge material, and waste are not recovered from a solid model.

The filament picker starts with the first published density in the project's matching filament family. If the family isn't recognized, it starts with Bambu PLA Basic's density and labels that assumption. Each choice links its BambuStudio profile. Pick your actual material or enter a density override; a selected filament with no published density needs your input before a geometry-based weight or cost can be shown. These choices never replace sliced filament weights.

Fill is a guess, not a slice

The fill control starts at 35% and accepts 10–100%. If you use a fill assumption, it is a planning guess layered onto the solid volume. A simple material planning estimate can be described as:

estimated material volume = solid volume × fill factor

For project cost, the tool combines the material estimate with your entered filament price, waste percentage, markup, and electricity inputs. In plain form: material cost = estimated grams ÷ 1000 × price per kg; electricity cost = watts × time in hours ÷ 1000 × price per kWh; subtotal = material + electricity; total = subtotal × (1 + waste) × (1 + markup). A project file without a sliced time prediction has no electricity-time input to calculate, so it does not receive an invented time.

The fill factor is not a substitute for a slicer profile. Wall loops, top and bottom layers, supports, infill pattern, line width, overlap, purge towers, and brims can all change real usage. Platewise gives no unsliced print-time estimate because time requires a toolpath and machine settings.

What to trust

  • Use a slicer's prediction when the file contains one, and check which plate and profile it describes.
  • Use the filament manufacturer's published density and settings for the specific product, not a generic family label.
  • Treat geometry-derived values as estimates, especially for open or complex meshes.
  • Confirm the result in your slicer before buying material or quoting a job.

See the filament reference or return to the file reader.