Print settings

Nozzle temperature (°C)
260–300Source: [1][2][3]
Hardened nozzle
RequiredSource: [1][2][3]
Cool plate (°C)
Not recommendedSource: [1][2][3]
Engineering plate (°C)
100–120Source: [1][2][3]
Smooth PEI (°C)
100–120Source: [1][2][3]
Textured PEI (°C)
100–120Source: [1][2][3]
Open-frame printer
Not recommendedSource: [1][2][3]
Enclosed printer
RecommendedSource: [1][2][3]
AMS
Bambu PA-CF, PAHT-CF: CompatibleSource: [1][2][3]
0.2 mm nozzle
Not compatibleSource: [1][2][3]
0.4 mm nozzle
CompatibleSource: [1][2][3]
0.6 mm nozzle
RecommendedSource: [1][2][3]
0.8 mm nozzle
CompatibleSource: [1][2][3]
0.4 HF mm nozzle
Not recommendedSource: [1][2][3]
0.6 HF mm nozzle
CompatibleSource: [1][2][3]
0.8 HF mm nozzle
CompatibleSource: [1][2][3]

Density and drying

Published densities

Drying

Required before printing. Source: [1][2][3]

Drying methods from the source table
MethodSettingSource note
AMS 2 Pro65°C, 12hSource: [1][2][3]⚠ Bambu marks this method as possibly not drying fully
AMS HT85°C, 12hSource: [1][2][3]—
AMS 3H85°C, 12hSource: [1][2][3]—
Convection oven75–85°C, 8–12hSource: [1][2][3]—
Printer heatbed (H, X, P1S, P2S)90–100°C, 12hSource: [1][2][3]—

Notes

  • Bambu suggests its glue stick for PA6-GF/CF and PAHT-CF.Source: [1][2][3]

Sources

Numbered markers beside values link to the source documents for this record.

  1. [1] Bambu Lab Wiki: Filament guide (printer, nozzle, AMS, build plate)
  2. [2] Bambu Lab Wiki: Filament drying guide
  3. [3] BambuStudio filament profiles on GitHub (filament_density)